This is the new Pedal Board Amp. This one has a custom made all aluminum
Chassis. It was made for Jason V. The Amp is a Bonepicker Half Breed. The
amplifier is an all tube Princeton / Deluxe Reverb Hybrid. It has 2 Tung-Sol 6V6
output tubes, 2 JJ 12AX7's, 2 JJ 12AT7's, and a JJ GZ34 Rectifier. The amp has a
Reverb section with Dwell control and a modified Tremolo section for extra slow
warble. The controls from left to right are; Volume, Treble, Bass, Reverb Volume,
Reverb Dwell, Tremolo Intensity, and Tremolo Speed. The Wah, Compressor, TS-9,
and Small Stone are all Bonepicker custom true bypass and modified. The Full
Drive is wired at 18 VDC and the Chorus is wired at 12 VDC. Jason is testing the
amp out now and will be sending sound-bytes soon. The cab is also a Bonepicker
custom with a 12" Celestion and a 10" Jensen.
Chassis. It was made for Jason V. The Amp is a Bonepicker Half Breed. The
amplifier is an all tube Princeton / Deluxe Reverb Hybrid. It has 2 Tung-Sol 6V6
output tubes, 2 JJ 12AX7's, 2 JJ 12AT7's, and a JJ GZ34 Rectifier. The amp has a
Reverb section with Dwell control and a modified Tremolo section for extra slow
warble. The controls from left to right are; Volume, Treble, Bass, Reverb Volume,
Reverb Dwell, Tremolo Intensity, and Tremolo Speed. The Wah, Compressor, TS-9,
and Small Stone are all Bonepicker custom true bypass and modified. The Full
Drive is wired at 18 VDC and the Chorus is wired at 12 VDC. Jason is testing the
amp out now and will be sending sound-bytes soon. The cab is also a Bonepicker
custom with a 12" Celestion and a 10" Jensen.
I want to ensure that I capture the amp well.
I used two SM-57s at different places on the front of the speaker cab and blended them into a mono track. Nothing cosmic. For
the "dirty" tracks, I used your distortion pedal to promote that thing, as well. The details are below.
Here's a description of the files:
1. "Les Paul - Amp Clean" - this file is just the Les Paul with both pickups on and set at 6. The amp is set at 4. The tune is parts
of a song I wrote years ago called, "Concrete River".
2. "Les Paul - Amp Clean (Pearl Jam)" - this file is the same set up as the first, but I play a well-known Pearl Jam song from their
album "Ten". It's the intro to "Release".
3. "Les Paul - Amp Clean with Electro-Harmonix Small Stone" - same set up as the first two files, but with the bridge pickup only
(set at 10) and the Small Stone added. The tune is parts of a song I wrote a long time ago called, "Tears Fall in My Hands".
4. "Les Paul - Amp with Bonepicker Distortion" - same set up as #3 above. All I did was add your distortion pedal to the mix. The
tune is something I "wrote" on the spot. You wanted something heavy, I thought this would suffice.
5. "Les Paul - Amp with Bonepicker Distortion (Ratt) - same set up, but I play parts of the old Ratt song "Lay it Down"...I love that
song.
6. "Strat - Amp Clean" - same theme: middle pickups at 6 and amp at 4. I just played something that had arpeggios and chords
strumming combined. I think these are the chords to a song I know, but I haven't figured it out yet. I didn't write it.
7. "Strat - Amp with Bonepicker Distortion (Kiss)" - bridge pickup on 10 with your distortion pedal at 10, as well. Pretty thick for a
single coil with the amp at only 4. I am impressed. You should know the tune, sing it with me, "you know you're man is working
hard...he's worth a deuce"
8. "Start - Amp with Fulltone Full Drive (AC-DC)" - bridge pickup on 10, amp at 4, and the Full Drive, ("overdrive" side only, "boost"
side is off) set at the 9 o'clock position (minimal overdrive). I figured I'd throw something in from Highway to Hell (since that's our
favorite AC/DC album). I'm gonna walk all over you...
9. Jackson RR3 Guitar with Pedal Board Amp, Bonepicker Distortion, and Arion SAD-3 Delay.
10. Jackson RR3 Guitar, Pedal board Amp, Bonepicker Distortion, and Bonepicker WAH.
11. Jackson RR3 Guitar, Pedal Board Amp W Tremolo effect on, and Bonepicker Distortion.